What does bonnet removed mean?

The bonnet functions as a cover and guard for the waste port as the globe rotates. The globe will not rotate without the bonnet installed. If a cycle is interrupted or the bonnet is removed, the unit will stop, and the yellow light will flash slowly, about 1x per second .

How do you put the bonnet back on a Litter-Robot?

Litter-Robot 4: Bonnet installation guide Remove the old bonnet: Press and hold the latches on both sides of the bonnet, then lift and rotate the bonnet to its open position. ... Install the new bonnet: Place the bonnet into the hinge behind the robot as shown. ... Press the Reset button to zero the weight sensors.

What is the bonnet on the litter robot 4?

Litter-Robot 4 features a bonnet that covers the globe and functions as a guard for the waste port as the globe rotates . Sensors on the unit detect if the bonnet is on or off. This ensures that Litter-Robot will not rotate if the bonnet has been removed.

What is a bonnet meant for?

Modern bonnets are often made of silk or satin to preserve one's hairstyle while asleep or lying down . They maintain a similar shape to bonnets that were popular in the 1960s. But it is more likely that these styles of headdress originated from the use of shower caps due to their appearance and application in salons.

What is an example of a bonnet?

/ˈbɒnɪt/ A bonnet is an old-fashioned hat that ties under the chin . Sometimes people dress babies up in frilly clothes and bonnets. A bonnet isn't stiff like many hats are — instead, it's made of soft fabric and has no brim.

Can a Litter-Robot be repaired?

Yes, we offer repair services . If your unit needs repair, contact our Customer Experience Team to discuss what the options are.

How do you update a Litter-Robot?

On the Robot Settings page, tap Firmware Updates. On the Firmware Updates page, tap Update to begin the update process . This may take up to 30 minutes to complete. You will see a single white light blinking on your unit's control panel - this is your signal that your robot's firmware is updating.

What happens when Litter-Robot gets full?

Once a full waste drawer is detected, the unit will indicate it is full with a blue flashing light . You will also receive a notification on your phone if you use the Whisker app. The unit will cycle two additional times before it will no longer automatically cycle.

How do you fix a cat sensor fault Litter-Robot?

Check for obstructions that might prevent the cat sensor from functioning. Make sure Litter-Robot is on a firm, level surface. The cat sensor function can be affected if the unit is on carpeting or a litter mat. Check that there are no power cords running underneath the base of the robot that might obstruct movement. More items...

How do I fix my Litter-Robot offline?

Re-connecting Litter-Robot 3 Perform a hard reset on your Litter-Robot. Unplug the unit from the back of the base. ... Ensure you are using the latest version of the Whisker app. ... Update your network in the Whisker app. ... Reboot your router. ... Press both the Cycle and Empty buttons together for approximately 3 seconds.

Litter Robot Says Bonnet Removed (2024)

1. How To Fix Bonnet Removed Sensor Error - Litter-Robot 3

Bonnet: Inspect bonnet connections. Remove the bonnet by pressing the latches on both sides of the bonnet, then lift while rotating it backward; there are two ...
Find solutions for fixing the Litter-Robot 3 bonnet removed sensor error on our help page. Find out what the slowly flashing yellow light means!

Litter Robot Says Bonnet Removed (2024)

FAQs